The “dataTaker DT8x driver for LabVIEW” v1.00 has now been released.
It can be downloaded from our website at
The documentation has also been placed online at
http://www.datataker.com/LabviewDT80/DT ... alette.php
The changes for this driver are:
Further enhancements to DT8x DecodeRecord.vi, so it can parse data from the DT80 for Alarm messages, Job Change messages, program change messages, and will show error responses from the DT80. This is located on the Low Level Utility Palette
Created documentation for DT8x DecodeRecord.vi
http://www.datataker.com/LabviewDT80/VI ... Record.php
Created example DT8x Example LowLevelUtilCurrentRunningJob.vi, which demonstrates using DT8x DecodeRecord.vi to find the current running job using the DIRJOBS command. This is located on the Low Level Utility Examples Palette
Created example DT8x Example LowLevelRealTimeAcquisitionTCPIP_noConfiguration.vi, which demonstrates retrieving real time data from a DT80 family datalogger, which has a previous program configured. This can be used to retrieve realtime data from a datalogger that has a current dEX configuration loaded.